Longitudinal‐Vertical Hydrodynamic and Turbidity Simulations for Prediction of Dam Reconstruction Effects in Asian Monsoon Area1

Abstract: This research investigates possible impacts of enlarged water body according to dam reconstruction on the hydrodynamics and water quality of the reservoir using a laterally averaged, two‐dimensional hydrodynamic and transport model, CE‐QUAL‐W2. The lake was formed by the artificial dam in 1983 for agricultural water supply and is currently under consideration of reconstruction so as to expand the volume of reservoir for flood control as well as water supply in downstream areas. To calibrate and validate the model, field‐collected data were compared with model predictions for water level fluctuations and water temperature during the years of 2001 (from January to December) and 2003 (from March to November). The model results showed a good agreement with field measurements both in calibration and verification. Utilizing the model, impacts of dam reconstruction on the thermal hydrodynamics and turbid current were predicted. From the model results, dam reconstruction limited the depth of thermal stratification below 10 meter and formed steep temperature gradient between epilimnion and hypolimnion. The restricted thermal stratification persisted up to the end of September. This result indicated that thermal stratification would become stronger during summer and stay longer after dam reconstruction. In addition, the restricted thermal stratification caused vertical circulation of water mixing lower than 10 meter and isolated the upper water layer from the lower water layer which increased the volume of hypolimnetic water with low temperature. The vertical circulation near the surface also mitigated propagation of density plume within the depth of 10 m which would remain the hypolimnetic water clean.     

Material and heavy metal balance in a recycling facility for home electrical appliances

Collection and recycling of home electrical appliances was started in Japan in 2001 under a new recycling law. The law is aimed at promoting material recycling and at reducing the amount of waste to be landfilled. End of life products are processed by manual disassembly, shredding, and separation in 38 recycling facilities. The authors conducted a questionnaire survey and interviewed at some facilities to obtain information on process flow and material balance. By using the detailed records offered by one facility and by estimating the composition of recovered components, the material balance in the facilities was determined for four typical recycling processes. The heavy metal content of the recovered components was analyzed, then metal flow in the process was determined for each scenario. As a result, it was concluded that emissions to the environment of most heavy metals have been substantially reduced by the new recycling system, while a modest improvement in the rate of material recovery has been achieved.     

Solidification of arsenic and heavy metal containing tailings using cement and blast furnace slag

The objective of this study is to examine the solidification of toxic elements in tailings by the use of cement and blast furnace slag. Tailings samples were taken at an Au-Ag mine in Korea. To examine the best mixing ratio of tailings and the mixture of ordinary Portland cement (OPC) and blast furnace slag (SG) of 5:5, 6:6, 7:3, and 8:2, the 7:3 ratio of tailings and OPC+SG was adapted. In addition, the mixing ratios of water and OPC + SG were applied to 10, 20, and 30 wt%. After 7, 14, and 28 days' curing, the UCS test was undertaken. A relatively high strength of solidified material (137.2 kg cm?2 in average of 3 samples) at 28 days' curing was found in 20 wt% of water content (WC). This study also examined the leachability of arsenic and heavy metals (Cd, Cu, Pb, and Zn) under the Korean Standard Leaching Test, and it showed that the reductions in leachabilities of As and heavy metals of solidified samples were ranged from 76 to 99%. Thus, all the solidified samples were within the guidelines for special and hazardous waste materials by the Waste Management Act in Korea. In addition, the result of freeze-thaw cycle test of the materials indicated that the durability of the materials was sufficient. In conclusion, solidification using a 7:3 mixing ratio of tailings and a 1:1 mixture of OPC + SG with 20% of WC is one of the best methods for the remediation of arsenic and heavy metals in tailings and other contaminated materials.     

Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Effect of occupational health nursing practice on musculoskeletal pains among hospital nursing staff in South Korea

Objective. The purpose of this study was to identify whether occupational health nursing variables serve as the contributing factors to musculoskeletal pains (MSP). Methods. A self-administered questionnaire composed of demographic characteristics, the practice of occupational health nursing and information regarding MSP was designed based on in-depth interviews with eight nurses. This study included 226 hospital nursing staff who worked at three university hospitals located in Seoul, South Korea. Statistical analysis was performed by using SPSS and AMOS 19.0. Results. Shoulder and neck pains occurred when subjects worked more than 46?h/week. Subjects who performed ‘work-time adjustment’ had lesser chance of having shoulder, leg/foot and wrist/finger pains. Overtime work hours showed an indirect effect on multiple sites of MSP by mediator variable, which was ‘work-time adjustment’. Organized night duty days eventually decreased multiple sites of MSP. Conclusion. Administration strategies for nurses to adjust work-time within 46?h/week should be considered.     

CO2 emission assessment of lightweight aggregate concrete using artificial lightweight and bottom ash particles

Journal of Material Cycles and Waste Management - This paper proposes empirical models to straightforwardly assess the CO2 emissions of artificial lightweight aggregate concrete (ALWC) and bottom...     

Visual determination of nitrite and nitrate in waters by color band formation method

A spot test for aqueous nitrate and nitrite for controlling nitrogen removal performance in small-scale wastewater treatment facilities is proposed. In this method, NO(2)(-) ion in water samples was allowed to react with sulfanilic acid and 1-naphthol to form an anionic azo dye. The resulting colored solution was introduced onto a mini column (similar to a gas detecting tube) packed with PVC particles coated with benzyl cetyl dimethyl ammonium chloride (BCDMA) and biphenyl. The NO(2)(-)-N concentration was determined visually by measuring the color band length (CBL) in the column. The CBL correlates linearly with nitrite concentration in the 4-20 mg-N l(-1) range. The concentration of nitrite+nitrate was determined after reduction to nitrite with zinc. The concentration of NO(3)(-)-N species was calculated by difference. This method was used to visually determine the concentrations of NO(2)(-)-N and (NO(2)(-)+NO(3)(-))-N in domestic wastewater samples with maximum suspended solid (SS) and chemical oxygen demand (COD) concentrations of 114 mg l(-1) and 73.9 mg l(-1), respectively.     

Simultaneous oxidation of EDTA and reduction of metal ions in mixed Cu(II)/Fe(III)-EDTA system by TiO2 photocatalysis

Both the photooxidation of EDTA and the photoreduction of metal ions in metal-EDTA systems were investigated. EDTA oxidation by TiO(2) photocatalysis occurred sequentially as Cu(II)-EDTA>Cu(II)/Fe(III)-EDTA>Fe(III)-EDTA. For Cu(II)-EDTA, EDTA was completely decomposed after only 60min of irradiation. The rate of EDTA decomposition was directly correlated with the initial Cu(II) concentration in the case of a mixed Cu(II)/Fe(III)-EDTA system. The metal ions in a single metal-EDTA complex were removed following significant decomposition of EDTA. For a mixed Cu(II)/Fe(III)-EDTA system, however, no copper was removed whereas almost all of the iron was removed. The iron and copper species deposited on the TiO(2) surface were identified via EPR and XPS as mixed FeO/Fe(3)O(4) and Cu(0)/Cu(2)O, respectively.     

APPLICATION OF GREY MODEL TOWARD RUNOFF FORECASTING1

ABSTRACT: A reliable forecasting model is essential in real‐time flood forecasting for reducing natural damage. Efforts to develop a real‐time forecasting model over the past two decades have been numerous. This work applies the Grey model to forecast rainfall and runoff owing to the model's relative ability to predict the future using a small amount of historical data. Such a model significantly differs from the stochastic and deterministic models developed previously. Ten historical storm events from two catchment areas in northern Taiwan are selected to calibrate and verify the model. Results in this study demonstrate that the proposed models can reasonably forecast runoff one to four hours ahead, if the Grey error prediction method is further used to update the output of the model.